Maintaining a clean duct system not only improves your property's indoor air quality, but also ensures that your furnace is working properly. Need full-service duct cleaning in Calgary? Call Clean-All Furnace Cleaning today. We'll get your job done right the first time.
How Clean-All Does Duct Cleaning
Each furnace system has two sets of ducts, the cold air return and the hot air supply systems.
Cold Air Return System
We brush out the entire length of the plenum. We then run a very powerful vacuum hose down the entire length of the cold air main, picking up the loose debris and dust. We then blow compressed air down, removing loose dust from those ducts. We then clean the sideway runs by running the vacuum hose down through the main plenum and use compressed air to clean those runs as well.
We don't just clamp our hose on one spot by the furnace; there is no way to properly clean any system by only clamping your suction system to one spot on the ducts. We do duct cleaning in Calgary on systems that have been cleaned 10 times or more over a couple of years by other companies and we still pull all kinds of debris that others have missed. If you ask us before we seal the cleaning doors, we can show you the lengths of the plenums so you can see that they are very clean.
Hot Air System
We clean the duct work in the same fashion. When we run our vacuum hose down the hot air arteries, we start to pick up debris (after about six feet) left by inferior cleaning systems that blow the debris away from the vent openings. Once more, if you ask us before we seal the cleaning doors, we can show you the lengths of the plenums so you can see that they are very clean.
Don’t get goosed by dirty ducts, Calgary, call Clean-All Furnace Cleaning today!